Welcome, visitor! [ Register | Login


fiber optic repeater suppliers

  • Contract Type: Contractors
  • Contact Name: 3
  • Contact Number: 6576575675
  • Region: Amaury
  • Listed: 18-October-2018 06:21
  • Expires: 17 days, 17 hours


20W High Power WCDMA MCPA Inline Booster
System advantages
CenRF WCDMA (UMTS2100) MCPA Inline Booster are used in combinations with base stations or repeaters to amplify and distribute the uplink and downlink signals in-buildings. It effectively enhances the signals in shadow areas in urban high rises like hotel, office buildings, shopping centers, apartment complexes as well as basements.
See application diagram in figure, Booster takes signal source input from feeder cable via coupler or splitters, amplifies and distributes the signal to coverage antenna sub-systems.
CenRF WCDMA (UMTS2100) MCPA Inline Booster are modularly designed, users can deploy diversified RF output rate and power supply options for various projects, that provide a low-cost and highly-capable solution of mobile communication network optimization.
Product Features:
●Support Muti-Carriers, Ideal for Muti-operators In-building solution.
●Use of wideband high linearity and low intermodulation amplifier, to ensure strong signal input of the linear output.
●Very low system noise can be connected multiple inline boosters in parallel.
●Digital intelligent automatic synchronization with donor BTS.
●Integrated WCDMA(UMTS2100) modem with OMT software. Support optional OMC remote management system (NMS).
●IP65 Aluminum cast casing designed for all kinds of tough outdoor and indoor environments.
●Optional backup battery and multiple power supply choices available (AC/DC/Solar Power).
●Highest standard industrial standards applied, with MTBF over 60,000hrs.
Power Supply and Mechanical Specifications
Power SupplyAC: 220V±60V, 45~55Hz
Dimension and Weight395*460*185mm, ≤20kg
Max. Power Consumption≤150W
Operating Temperature-25 to +55℃
Operating Humidity≤95%
Environmental ClassIP65
RF ConnectorN-Female, 50ohm
MTBF≥50000 hours
Monitor InterfaceLocal Monitor: RS232, Remote Monitor: 485
Product numberCRF-MCPA2100-B043WCDMA(UMTS2100) MCPA Booster 20W
Electronic Specifications
Frequency Range2110 – 2170MHz1920 – 1980MHz
Output Power (Max.)43±2dBm-10±2dBm
Gain (Max.)45±3dB42±3dB
NF-≤5dB at min. gain
Max input without damage10dBm-10dBm
Gain Adjustable Range/Step≥20dB/1dB
Gain Adjustable ErrorGain adjustable range is 0~20dB, error≤1dB; ≥21dB, error≤1.5dB
ALCWhen adding ≤10dB at max. output level, output variation ≤±2dB,
When adding >10dB, output variation ≤±2dB or be off.
Ripple in Band≤2dB/3.84MHz, ≤4dB in bandwidth
Time Delay≤1.5μs
Spurious EmissionComplies with 3GPP TS 25.106 and 3GPP TS 25.143
Spectrum Emission MaskComplies with 3GPP TS 25.106 and 3GPP TS 25.143
Input Inter-modulationComplies with 3GPP TS 25.106 and 3GPP TS 25.143
ACRRComplies with 3GPP TS 25.106 and 3GPP TS 25.143
Out of Band GainComplies with 3GPP TS 25.106 and 3GPP TS 25.143
Frequency Stability≤0.01ppm
PCDE≤-35 dB
If you’re interested in our 20w high power wcdma mcpa inline booster, please be free to buy the high-quality products from our factory. As one of the best manufacturers and suppliers, we will offer you good after-sale service and fast delivery.
CenRF Communications Limited
Add:9F, Dongguan Building, Jiangnan Ave 4288, Binjiang District, Hangzhou
Contact:Alan Huang
Tel: +86-571-86631886
Fax: +86-571-89930536
Mobile: +86-18969122786
E-mail: sales@cenrf.comfiber optic repeater suppliers

No Tags

26 total views, 1 today


Listing ID: 1895bc7ee3ebd55c

Report problem

Processing your request, Please wait....

Sponsored Links

Leave a Reply

You must be logged in to post a comment.